MT economy type rope type displacement sensor

MT series rope displacement sensor Our economical displacement sensor designed by our company has many models of MT40, MT60 and MT80. MT40 rope displacement sensor range 100mm~1200mm; MT60 rope displacement sensor range 100mm~1500mm; MT80 rope displacement sensor range 200mm~3000mm, signal output type: resistance output, voltage output (0-5V; 0-10V), Current output (4-20mA, two-wire or three-wire), pulse output (AB phase or ABZ phase incremental square wave), RS485 digital signal or absolute coded output. The sensor is small in size, high in precision, easy to install and use, and widely used in the automation industry.

Main performance parameters of the sensor:

Sensor installation dimension drawing:

Sensor wiring instructions:

(The sensor is forbidden to connect to 220V AC industrial power supply. The three-wire current output rope displacement sensor should be connected to the load first, and then commissioned at power to avoid overload damage.)

MT drawstring displacement sensor main application areas: MT drawstring displacement sensor has a wide range of applications, mainly applicable to: storage location positioning, reservoir dam protection, gate opening control, pressure machinery, paper machinery, textile machinery, sheet metal machinery, Packaging machinery, printing machinery, level control equipment, construction machinery, industrial robots, injection machines, woodworking machinery, elevators, air compressors, hydraulic presses, height machines, XY axes and other length displacement, liquid level measurement and other automated measurement occasions.

Sensor installation instructions:

1. Select the range of the rope displacement sensor to leave a margin. It is forbidden to use the over-range. Generally, the range of the larger specification can be selected on the basis of the actual stroke.

2. Use the sensor mounting bracket or fixing screw hole to install or add protection device directly according to the needs of the site and the installation space of the machine.

3. When the cable sensor is installed and used, it must be noted that the drawstring and the rope exit are parallel (allowing a maximum deviation of ±3°) to ensure the measurement accuracy and service life of the sensor.

4. MT series drawstring displacement sensor drawstring is made of stainless steel and coated with anti-corrosion plastic layer. Please pay attention to protect it from external force, scratch, dust or debris intrusion into the sensor, resulting in the sensor running smoothly.

5. Before the cable displacement sensor is installed and fixed, do not pull the cable out and bounce it back. This will cause the cable to break. In severe cases, the potentiometer (or encoder) can be damaged.

6. The instantaneous speed of the reciprocating motion of the rope displacement sensor should be less than 1m/s.

7. The running direction of the drawstring displacement sensor should be kept horizontal with the direction of the rope exit. If the running direction changes, a pulley device should be installed.

8. MT series economical drawstring displacement sensor has relatively low protection level. It should be added with dustproof and waterproof treatment for open air use (please contact us for explanation), or our waterproof drawstring displacement sensor is preferred.